Output Results

HyperForm generates results files, .res, containing the following output, which can be viewed from the Contour panel:

•	Displacements

•	Thinning (%)

where:

= initial thickness

t = final thickness

Note: Element percentage thinning values are positive when the material thins out.

•

Thickness

•	Major Strain

•	Minor Strain

•	Effective Strain

•	Effective Stress

•	Deformation mode

This is the same as strain mode and is the angle between the line joining the minor strain (x-axis), major strain (y-axis) plot of an element to the origin and the major strain axis (y-axis), clockwise being positive. This gives a measure of the relative tension and compression at each element on the blank surface.

•	Formability

-	Same as shown under the FLD plots panel. For elemental values, click assign.

Output Results

Output Results

Output Results

See Also: