CoilSpring (hwx.inspire.motion)#

class CoilSpring(self, **kwds)#

Bases: MotionConnector

Creates a Coil Spring.

Coil Springs are used to apply a translational spring-damper force along the line of sight between two parts. Coil Springs provide a linear resistance and/or damping between two objects.

Changing any one of preload, installedLength, freeLength, or k will influence the other values:

Changing preload modifies freeLength.

Changing installedLength, k, or freeLength modifies the computed preload.

Attribute Table#
Name	Type
`c`	`Double`
`clinear`	`Bool`
`coilColor`	`Color`
`coilDiameter`	`Double`
`coils`	`Int`
`compute`	`Enum`
`connectorMode`	`str`
`cspline`	`Spline`
`csplineMethod`	`Enum`
`damperColor`	`Color`
`damperScale`	`Double`
`diameter`	`Double`
`entity1`	`Reference`
`entity2`	`Reference`
`exponent`	`Double`
`features`	`property`
`folder`	`str`
`freeLength`	`Double`
`hasDamper`	`property`
`hasSpring`	`property`
`icon`	`str`
`installedLength`	`Double`
`isGrounded`	`property`
`k`	`Double`
`klinear`	`Bool`
`kspline`	`Spline`
`ksplineMethod`	`Enum`
`location1`	`Location`
`location2`	`Location`
`locked`	`Bool`
`lowerBound`	`property`
`max_damping_coeff`	`Double`
`max_penetration`	`Double`
`mountColor`	`Color`
`movable`	`bool`
`parallelMounts`	`Bool`
`parallelMountsJoint`	`Enum`
`preload`	`Double`
`reverseDirection`	`Bool`
`solverVariables`	`property`
`springLimits`	`Bool`
`stiffness`	`NonLinearStiffness`
`type`	`Enum`
`upperBound`	`property`
`wireDiameter`	`Double`

Example

from hwx import inspire
from hwx.inspire import motion

M44 = inspire.math.Matrix44
model = inspire.newModel()
block  = model.createSolidBlock(ground=True)
sphere = model.createSolidSphere(position=M44(origin=(0,0,-4)))
face = block.features[24]

spring = motion.CoilSpring(
   entity1   = face,
   location1 = (.5, .5), # Feature coords
   entity2   = sphere.features[0],
   location2 = (0,0,-3),
)

print("spring.k", spring.k.guiValue)
inspire.fitView()

property type#

Specifies the type of Coil Spring.

Coil Spring can be of type Spring Damper or only Spring or Damper, defaults to Spring Damper.

property parallelMounts#: If True, creates a Cylindrical or Translational joint at the two endpoints of the spring, which prevents the entities from separating during Motion Analysis, defaults to False.

property parallelMountsJoint#: Specifies what type of joint to be created if Parallel Mounts is enabled.

property springLimits#: Prevent the spring from expanding or collapsing beyond its natural limits.

property locked#: If True, prevents the spring from expanding or collapsing during Motion Analysis.

property k#: The stiffness value of the coil spring, defaults to 1000 N/m.

property c#: The damping value of the coil spring, dafaults to 1 N*s/m.

property klinear#: Enables linear stiffness with the value specified for property k, else uses interpolation methods to get stiffness value.

property ksplineMethod#

Specifies the type of interpolation method to use.

Types can be Akima, Cubic or Linear.

property clinear#: Enables linear damping with the value specified for property c, else uses interpolation methods to get damping value.

property csplineMethod#

Specifies the type of interpolation method to use.

Types can be Akima, Cubic or Linear.

property preload#: Specifies the force applied to the coil spring to expand or contract to reach its free length.

property installedLength#

Specifies the distance between the two endpoints of the coil spring.

This is an auto computed value, user cannot modify it.

property reverseDirection#: If True, reverses the direction of Preload force.

property compute#

Specifies whether the Preload or the Free length is auto computed.

By default Preload force is auto computed.

property entity1#: Specifies the starting endpoint of the coil spring is attached to a Feature, Joint or a Fastener.

property entity2#: Specifies the ending endpoint of the coil spring is attached to a Feature, Joint or a Fastener.

property location1#: The location of the starting endpoint of the coil spring.

property damperScale#

Use to increase the damper diameter relative to the spring diameter.

The value must be greater than 0, or less than or equal to 1, defaults to 0.5.

property diameter#: Used to change the diameter of the coil spring.

property coilColor#: Specifies the color of the coils around the spring.

property damperColor#: Specifies the color of the damper of the spring.

property mountColor#: Specifies the color of the mounts added to coil spring when Parallel Mounts is enabled.

property exponent#

Exponential value used to generate the stiffness.

This property is not specifiable when the coil spring is of type Damper.

property stiffness#

Specifies the spring stiffness.

This property is not specifiable when the coil spring is of type Damper, defaults to 1E+06 N/m.

property max_damping_coeff#: Specifies the maximum damping value of the coil spring, defaults to 100 N*s/m.

property max_penetration#: Specifies the maximum penetration depth of the coil spring, defaults to 0.0001 m.

property location2#: The location of the end endpoint of the coil spring.

property coilDiameter#: Specifies the diameter of the coil spring.

property wireDiameter#: Used to change the diameter of wired coils around the spring.

property coils#

Number of coils in the spring, defaults to 10.

This is not specifiable if the spring is of type Damper.

property freeLength#: Specifies the length of the coil spring at resting state.

flip()#: Swaps the two location end points of the connector.

property hasSpring#: Specifies if the coil spring has any springs.

property hasDamper#: Specifies if the coil spring has any dampers.

property lowerBound#: Minimum distance between end points if springLimits enabled.

property upperBound#: Maximum distance between end points if springLimits enabled.

property features#: Returns the features associated with the connector object.

property isGrounded#: Specifies if the coil spring is a grounded spring or not.