::hwat::utils::PositionDummyOnImport

Positions the dummy’s H-point at the required coordinates and, if required, rotates the dummy’s back angle by the given amount.

Syntax

PositionDummy rootSysId hPointX hPointY hPointZ [backangle] [xRot] [yRot] [zRot]

Arguments

rootSysId
The ID of the root system of the dummy.
hPointX
The x-coordinate of the final position of the H-point of the dummy.
hPointY
The y-coordinate of the final position of the H-point of the dummy.
hPointZ
The z-coordinate of the final position of the H-point of the dummy.
backangle
The angle to rotate the dummy about the y-axis after it has been positioned.
Default = 0.0
xRot
The angle to rotate the dummy about the x-axis after import.
Default = 0.0
yRot
The angle to rotate the dummy about the x-axis after import.
Default = 0.0
zRot
The angle to rotate the dummy about the x-axis after import.
Default = 0.0

Returns

Success
1
Failure
{}

Example

::hwat::utils::PositionDummy 1234 3100 –370 500 10 0.0 0.0 180.0.

Comments

If the rotation angles are given, the order of the dummy rotation will be x, y, z.