*dynamicrotatemode

Sets mode for output of intermediate rotation commands.

Syntax

*dynamicrotatemode mode

Type

HyperMesh Tcl Modify Command

Description

Sets mode for output of intermediate rotation commands.

Inputs

mode: Set to 1 or 0.

Example

When mode is set to 1, the following output is generated:

*dynamicviewbegin 
*quatrotate -0.00785649346 -5.7397916e-005 0.00228960797 0.999966514 
*quatrotate -0.00994070323 0.00170778765 0.0047803938 0.999937705 
*quatrotate -0.00529684395 -0.000673180986 0.000802068982 0.999985423 
*quatrotate 0.000230328525 0.00100703597 0.00106667981 0.999998898 
*quatrotate -0.00263644785 -0.000327769044 0.000395387048 0.999996393 
*dynamicviewend

When mode is set to 0, the following output is generated:

*viewset(-0.722177, -0.299006,  0.623743,  0.000000,
0.657815, -0.575689,  0.485656,  0.000000,
0.213868,  0.761037,  0.612440,  0.000000,
    -3.756111,  5.964252, -3.030465,  1.000000,
    -8.703590,  2.583235,  0.886445,  8.621393)

When the mode is set to 1, intermediate *quadrotate() rotation commands are output to the command file. Otherwise, only the final position is output, reducing the size of the command file.