Calibration factors
Overview - Definitions - Inputs
| Label | Symbol | Tooltip, note, formula |
| Ref. temperature | * | The reference temperature.First, resistance values are computed by
considering a temperature equal to 20°C. However, the user can also define his own reference temperature to compute the corresponding phase resistance and Line-Line resistance values. Note: This reference temperature is used only in the
winding design environment. The test temperatures are defined in the test
settings (refer to TEST chapter).
|
| Winding resistance factor | * | Setting of the “Resistance factor”. It allows adjusting computation result of resistance with resistance measurement. Thus, the resulting phase resistance value is considered. |
| End winding inductance factor | * | Setting of the “Inductance factor”. It allows modifying the computation result of end-winding inductance. Thus, the resulting end-winding inductance value is considered. |
| Ref. max. Line-Line voltage | Umax | Reference maximum Line-Line voltage. It allows evaluating the voltage drop between the conductors. |
| Voltage drop limit | * | Voltage drop limit between 2 superimposed conductors. This limit is given to better visualize the voltage threshold which shall not be exceeded (see the displaying of colored fields in the table). |