Define Multiplier Functions

Use the Multipliers tool to create new multiplier functions.

1. From the Flow ribbon, click the arrow next to the Setup tool set, then select Multipliers.

   
   
   Figure 1.

   The Multiplier Library opens.
2. Click to add a new multiplier.
   A multiplier creation dialog opens.
3. Select a constant or varying multiplier type and input values.

   Option	Description
   Constant	Define a constant multiplying value.
   Piecewise linear, Piecewise Log Linear, Cubic Spline	Use the table and the plot area. You can use existing pre-defined functions to populate the data then edit the data using the table or interactively with the plot.
   Sinusoidal	Define frequency, amplitude, and phase.
   User Function	Enter a function then select an argument type from the drop-down menu and input values in the table.

4. Select a Variable, Evaluation method, and Filter.
5. Close the dialog.

Once multipliers are defined, they can be applied to domains, boundaries, radiation, or motion definitions. Click in a dialog to select a multiplier. You can also have the option to create a new multiplier.

Figure 2.

Use the Multipliers tool to edit existing multiplier functions.

1. From the Flow ribbon, click the arrow next to the Setup tool set, then select Multipliers.

   
   
   Figure 3.

   The Multiplier Library opens
2. Right-click on a multiplier and select Edit.
   A multiplier creation dialog opens.
3. Optional: Click the name in the top-left corner of the dialog to rename the multiplier.
   This can also be done by double-clicking on the Name field in the Multiplier Library.
4. Edit the multiplier parameters.
5. Close the dialog to return to the Multiplier Library.

Use the Multipliers tool to delete existing multiplier functions.

1. From the Flow ribbon, click the arrow next to the Setup tool set, then select Multipliers.

   
   
   Figure 4.

   The Multiplier Library opens
2. Select the multiplier to delete.
3. Click or right-click and select Delete.