Use the Combined Loadings tab to review and analyze the effects of Dynamic and Static
loads on the gap and relative displacement.
Important: The Combined Loadings tab is only activate when dynamic and
static loadcases are identified in the imported model file.
See Combined Loadings for more
information.
-
If necessary, open the SNRD-Post Browser.
-
In the SNRD-Post Browser, select the Combined Loadings
tab.
-
Select a loadstep from Loading type 1 list.
-
Select a static loadstep from Loading type 2 list.
-
Enter Scale factor values.
- Optional:
Select the Affects gap check box.
-
Select the required E-Line or All from E-Line(s)
Selection list.
-
Select the required analysis type from Session Type.
-
Click Combine Results.
The combined effect of the selected
loadsteps on the E-Lines is evaluated and the results are plotted,
relative displacement and histograms.