HyperGraph Interface with OptiStruct

This section explains how HyperGraph interfaces with the OptiStruct solver.

For information on hgopt, refer to External Readers.

The HyperGraph reader supports the following:
  • OptiStruct OPTI(ASCII) format.
  • Time history plots from *.h5 files generated from OptiStruct explicit analysis.

The figure below compares the old and new OPTI formats using ELFORCE (.force) as an example, which has improved readability.



Figure 1.
The tables below summarize the result and analysis types that support the OPTI format.
Table 1. Node-based Results
Result Type Analysis Types
DISPLACEMENT Linear Static, Normal modes, Linear buckling analysis.
DISPLACEMENT Frequency response analysis (Direct and Modal) in REAL/IMAG or MAG/PHASE formats.
VELOCITY
ACCELERATION
SPCFORCE Linear Static, Frequency response analysis (Direct and Modal) *.
MPCFORCE
Table 2. Element-based Results
Elements Linear Static Analysis Normal Modes Analysis Frequency Response Analysis (Direct and Modal) Response Spectrum Analysis
CELAS1, CELAS2 ELFORCE, STRESS, STRAIN ELFORCE, STRESS, STRAIN ELFORCE, STRESS, STRAIN STRESS, STRAIN
CROD
CBAR
CWELD STRESS, STRAIN
CGAP ELFORCE, STRESS, STRAIN
CSHEAR
CFAST
CBUSH
Shells (CTRIA3, CTRIA6, CQUAD4, CQUAD8)
Solids (CHEXA, CPENTA, CTETRA, CPYRA) STRESS, STRAIN STRESS, STRAIN STRESS, STRAIN
Axisymmetric Elements (CTAXI3, CTAXI4, CQAXI4, CQAXI8)
Plane Strain Elements (CTPSTN3, CTPSTN6, CQPSTN4, CQPSTN8)